Based on domestic market and expand overseas business is our development strategy for
Cross Flow Filtration
, Uf Filter Water Purifier
, Microfiltration System
, Trust us and you'll gain far more. Be sure to really feel free of charge to contact us for additional details, we assure you of our attention at all times.
Factory Cheap Hot Ultrafiltration Module -
MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
●Treatment, recycle and reuse of industrial waste water.
●Treatment of refuse leachate.
●Upgrade and reuse of municipal sewage.
Filtration Performance
No. |
Item |
Water?Output?Index |
1 |
TSS |
≤1mg/L |
2 |
Turbidity |
≤?1 |
Specifications
Size

Technical Parameters
Structure |
Outside-in |
Membrane?Material |
Reinforced Modified?PVDF |
Precision |
0.1 ?micron |
Membrane?Area |
25m2 |
Membrane?ID/OD |
1.0mm/ 2.2mm |
Size |
785mm×2000mm×40mm |
Joint Size |
DN32 |
Component Material
Component |
Material |
Hollow Fiber Membrane |
Reinforced Modified PVDF |
Sealing Compound |
Epoxy Resins + Polyurethane?(PU) |
Housing |
ABS |
Application Parameters
Designed?Flux |
10~25L/m2.h |
Backwashing?Flux |
30~60L/m2.h |
Operating Temperature |
5~45°C |
Maximum Operating Pressure |
-50KPa |
Suggested?Operating?Pressure |
0~-35KPa |
Maximum?backwashingPressure |
100KPa |
Operating Mode |
9min?Operation+1min?Break/8min?Operaetion+2min Break |
Blowing?Mode |
Continuous Aeration |
Aeration?Rate |
4m3/h.pc |
Washing Period |
Clean?water?backwashing?every?2~4h; CEB?every?2~4 weeks; CIP?every?6~12 months |
Using Conditions
There should be appropriate pretreatments before UF. If defoamer has to be used, please choose alcohol defoamer, silicone defoamer is forbidden.
Item |
Value |
PH?Range |
5~9 (washing: 2~12) |
Particle?Size |
<2mm, no?sharp?particles |
Oil & Grease |
≤2mg/L |
Hardness |
≤150mg/L |
Product detail pictures:
Related Product Guide:
Bear Customer first, High quality first in mind, we perform closely with our consumers and provide them with efficient and experienced services for
Factory Cheap Hot Ultrafiltration Module -
MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Belgium
, Costa rica
, Australia
, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our to serve your company, and establish a successful and friendly cooperation with you.